The Sharps Xtreme Performance Bolt (XPB) Balanced Carrier Group Complete is comprised of our patented Relia-Bolt™ and our Balanced Bolt Carrier. Both are machined out of S7 tool steel. The XPB undergoes a 24-hour thermal cycle proprietary heat treatment and is finished with NiB-X (Nickel Boron) Coating.
The XPB carrier displays the SRC logo machine cut and is visible when the ejection port door is open. The XPB fits standard AR-15/M16/M4 rifles chambered in .223/5.56, Sharps 25-45, and 300 Blackout calibers.
|Bolt||S7 Tool steel, shot peened NiB-X coated (U.S. Patent No. 9,863,729)|
|Bolt Carrier||S7 Tool steel, shot peened and NiB-X coated|
|Gas Key||4130 Steel, attached with Grade 8 hardware, properly staked and NiB-X Coated|
|Cam Pin||4340 Steel, Manganese Phosphate coated|
|Firing Pin||Mil Spec firing pin made of 8740 steel, center‐less ground and Hard Chrome coated|
|Extractor||4340 Steel, NiB-X coated|
|Ejector||S7, shot peened and Manganese Phosphate coated|
|Extractor Pin||S7, shot peened and Manganese Phosphate coated|
Mil-Spec Ejector Springs, Firing Pin Retaining Pin, Gas Rings
Batch MPI and HPT tested
Tensile strengths of 1550-1600 mpa, or 220,000-235,000 psi.
Toughness of over 200 ft./lb.
Charpy C-Notch HRC of 46 yields a 15% increase in hardness at the same toughness comparing to Carpenter 158 & 9310
Specifically engineered NiB-X nickel boron coating to provide long life, high reliability and easy cleaning and maintenance. The BCG components are coated and polished to reduce fouling adherence. Especially beneficial in short barrel setups and suppressed platforms.
|Hardness HV 0.05: ||HRC 70+|
|Friction vs Dry Steel:||0.1|
|Color: ||Hyper Silver (Polished)|
Limited Lifetime Warranty
If any SRC Bolt Carrier or Relia-Bolt™ is found to have manufacturer defects, SRC will repair or replace it at no charge. Manufacturer defects include out of spec parts and defective parts. Although our BCG is Mil-Spec, there are so many variables, sometimes a little troubleshooting, or fine tuning of parts may be required for proper functionality. Before a part is replaced or refunded, SRC reserves the right to inspect and test part(s) in question to determine if it is defective. Please keep in mind that altering the product renders the warranty void.