The redesigned lugs of the Relia-Bolt™ virtually eliminate the most common MSR malfunction; the bolt to barrel extension jam. Haven’t cleaned your rifle? Is it out of time? The Relia-Bolt™ compensates by providing a patented camming action which guides the bolt past obstructions and into battery. (U.S. Patent No. 9,863,729) The rounded/tapered lugs push past carbon and debris when the square edges of traditional bolts would typically jam. Once into battery, the rear edges of the lugs fully engage the barrel extension for absolute strength and security.
Unmatched Strength and Durability
The Relia-Bolt™ is machined from S7 tool steel and tempered with SRC’s proprietary heat-treating process, significantly increasing strength when compared to MilSpec Carpenter 158. S7 provides a 75% increase in tensile strength, and nearly 60% improvement in yield strength.
Superior Corrosion Resistance
Every Relia-Bolt™ is coated with Nib-X (Nickel Boron), an electroless nickel-based finish. This process co-deposits sub-micron particles of PTFE (polytetrafluoroethylene), commonly known as Teflon™, for self-lubricating corrosion resistance.
- Magnetic Particle Inspected
- High Pressure Tested, and Shot Peened
|S7 Tool steel, shot peened, Nib-X Coated
|4340 Steel, Nib-X Coated
|S7, shot peened and Manganese Phosphate coated
S7, shot peened and Manganese Phosphate coated
Limited Lifetime Warranty
If any SRC Bolt Carrier or Relia-Bolt™ is found to have manufacturer defects, SRC will repair or replace it at no charge. Please keep in mind that altering the product renders the warranty void.